Concentrated blended one drum liquid treatments incorporating new generation metal passivation technology designed for use in all steam boilers up to 600 psi. Generates many benefits including lower levels of solids contribution and reduced boiler blowdown.
Stable blended liquid catalyzed oxygen scavengers
Formulated to control scale and corrosion in low and medium pressure boilers on soft water make-up. Contains organic dispersants, sludge conditioners, sequesterants, antiprecipitants and amine. Designed for applications where significant amounts of condensate are being recovered.
Blended liquid treatment formulated to control solids deposition and scale formation in low and medium pressure boilers. In many applications continued use will also effectively remove existing deposits. Contains organic dispersants, sludge conditioners, sequestrants, anti-precipitants, copper inhibitor and an anti-foam.
Concentrated caustic based liquid cleaner formulated to remove oil, grease and particulates in new and retrofit steam boilers prior to operation. Suitable for all steam applications where rapid boiling will ensure total contact and provide some scouring action. Formulated to be 3-5 times more effective than standard alkaline cleaners in removing oil and grease preservatives as well as metal oxides and particulates. Cleaning times of 4-6 hours are normally adequate. Click to View SDS
Blended liquid treatments formulated to control low pH corrosion (grooving) in condensate recovery systems
Concentrated blended liquid multifunctional corrosion inhibitor formulated for use in automotive and diesel engine glycol based coolants and closed loop aqueous heat exchange systems. Protects both ferrous and non-ferrous system components. Particularly effective in systems containing aluminum and yellow metal components. In glycol systems it is also highly buffered to retard fluid degradation and prolong the useful life of the glycol.
Blended neutral pH cleaner formulated to remove oil, grease and particulates in new or retrofit installations, prior to operation. Designed for use in non-steam installations where rapid circulation will ensure good contact and provide some scouring action. Performance will be enhanced if the cleaning solution can be heated to 120° – 140° F. Biodegradable, environmentally friendly and is safe for all metallurgies at use concentrations.
Blended virtually neutral cleaner based on neutralized citric acid. Contains effective inhibitors for steel and copper as well as foam suppressant and a dispersant – penetrant to assist in removal and dispersion of unreactive portions of deposits. Particularly effective in closed loop applications where deposits contain a significant percentage of iron oxides.
Offers corrosion protection to all system metallurgies and controls solids deposition on heat exchange surfaces, to ensure efficient operation. Incorporates a very efficient penetrant which in most applications will effectively remove existing deposits during normal system operation. All organic, biodegradable and environmentally friendly.
A liquid 2-Bromo-2-Nitropropane-1, 3 Diol based microbiocide. HYDROTREET MB-360 is a registered product formulated to control microbiological growth in a wide range of applications. These include oil fields, paper mills, heat exchangers, cooling towers, condensers, air washers, pasteurizer cooling systems and metal working fluids. It also works as a preservative in latex emulsions, polymer lattices and adhesives.
Inhibited muriatic acid plus, a muriatic acid based cleaner containing effective inhibitors for steel and copper as well as a foam suppressant and a dispersant – penetrant to assist in penetration and dispersal of unreactive portions of deposits. Particularly effective in applications where deposits contain a significant percentage of carbonaceous material.
Inhibited phosphoric acid based cleaner containing effective inhibitors for steel and copper as well as a foam suppressant and a dispersant – penetrant to assist in penetration and dispersal of unreactive portions of deposits. Particularly effective in applications where deposits contain a significant percentage of hard water based material. As opposed to most types of acid cleaners it tends to produce a protective film on exposed metal surfaces and virtually eliminates flash rusting.
Powdered inhibited sulfamic acid based product formulated to remove deposits from mild steel, stainless steel, copper, brass & galvanized surfaces. In addition to inhibitors it contains a foam suppressant and a dispersant penetrant to assist in penetration and dispersal of unreactive portions of deposits. Particularly effective in applications where deposits contain a significant percentage of carbonaceous material.
Concentrated liquid inhibitor formulation designed specifically for use in Glycol/Water systems. Non-toxic environmentally friendly material suitable for use in either Ethylene or Propylene Glycol systems. Provides protection for both ferrous and yellow metals and unlike traditional Molybdate and Nitrite inhibitors does not contribute to toxicity. Technology is also designed to prolong the service life of the Glycol by minimizing the potential for acid degradation. Formulated to provide a large excess of dipotassium phosphate buffering capacity as well as inhibit corrosion.
Blended liquid organic treatment formulated for use in open and closed recirculating water systems where suspended solids or deposits are a problem. An effective dispersant which will control most inorganic water formed suspended solids as well as organic contaminants. In many cases this material will also remove existing deposits through re-suspension and normal system bleed off. Particularly effective in penetrating bio and oil films and facilitating their removal. Will also enhance performance in non-oxidizing biocide programs.